MOQ 2 pcs · Standard stock · Ready to ship
📧 sales@yoyangsolar.com ⚡ 24h Response
Home / Products

Off-Grid Solar Power Supply Systems for CCTV & WiFi Routers

Four standard models from 80W to 240W — every unit is a complete system: solar panel, 18650 lithium battery, charge controller and mounting bracket. One output voltage (DC 12V), fixed specs, consistent quality.

80W – 240W Panels DC 12V Output 18650 Ternary Li-ion MOQ 2 pcs
M SERIES

Mainstream — 2 to 3 Cameras (+ Router)

Dual-panel standard-bracket system — the workhorse for farms, warehouses and perimeter jobs.

YO-M8040 solar power supplyMAINSTREAM

YO-M8040

80W panel · 40Ah battery · DC 12V
  • 2–3 cameras + router
  • 2 panels (530×350×16 mm each)
  • Steel bracket 400×200 mm, 10.0 kg
  • 4–5 days rainy autonomy
View Details
P SERIES

Pro — 3 to 7 Cameras + High-Power Router

Pro-grade systems with standard or heavy-duty triangle brackets. Adjustable tilt, low-temperature heating film on request.

YO-P12060 solar power supplyPRO

YO-P12060

120W panel · 60Ah battery · DC 12V
  • 3–5 cameras + router
  • 3 panels (530×350×16 mm each)
  • Steel bracket, pole/wall mount, 16.0 kg
  • 7–10 days rainy autonomy
View Details
YO-P12060-T solar power supplyPRO

YO-P12060-T

120W panel · 60Ah battery · DC 12V
  • 3–5 cameras + router
  • Triangle bracket for pole mounting
  • High wind resistance, 16.0 kg
  • 7–10 days rainy autonomy
View Details
YO-P240120 solar power supplyFLAGSHIP

YO-P240120

240W panel · 120Ah battery · DC 12V
  • 6–7 cameras + high-power router
  • 4 panels (680×440×20 mm each)
  • Heavy-duty frame, 42.0 kg
  • 15–25 days rainy autonomy
View Details
Compare All

Full Specification Table

Same output voltage everywhere (DC 12V, max DC 16V) — choose by panel wattage and battery capacity.

ModelSeriesPanelBatteryPanels (size)BracketWeightRainy AutonomyLoad
YO-M8040M Mainstream80W40Ah2× 530×350mmSteel 400×200×12510 kg4–5 days2–3 cameras + router
YO-P12060P Pro120W60Ah3× 530×350mmSteel 400×270×125 (pole/wall)16 kg7–10 days3–5 cameras + router
YO-P12060-TP Pro120W60Ah3× 530×350mmTriangle bracket (pole)≈16 kg7–10 days3–5 cameras + router
YO-P240120 FLAGSHIPP Pro240W120Ah4× 680×440mmHeavy-duty 440×270×81042 kg15–25 days6–7 cameras + router

* Autonomy shown for typical 6–10W PTZ cameras with a low-power router; actual figures depend on camera model, recording mode and local sunlight. Ask us for a load check — it’s free.

Quick Answers

Common Questions About the Models

How do I know which model fits my cameras?
Count your cameras (and whether you also power a router), then check the load column in the table above. Every model outputs the same DC 12V — the difference is how many days it can run with no sun. Still unsure? Send us the camera model and count; we reply with a match within 24 hours.
Can one system power both my camera and a WiFi router?
Yes — routers that run on DC 12V are directly supported. A typical outdoor CPE router draws 6–12W; we recommend YO-M8040 or above when a router is on the same system. Tell us the router wattage and we’ll size it properly.
What is the difference between YO-P12060 and YO-P12060-T?
Same power core (120W panels, 60Ah battery). The standard YO-P12060 mounts on a pole or wall with a steel bracket arm; the -T version uses a heavy-duty triangle bracket for pole mounting in high-wind sites — stronger and more stable than the standard arm. Pick by installation site.
Is the battery replaceable later?
Yes. Systems use standard 18650 ternary lithium cells inside a sealed battery box. Battery warranty is 2 years; after that the pack can be serviced or replaced — we’ll guide you through it.

Not sure which model? Send us your load.

Camera models, count, router wattage and location climate — we match the system and quote FOB Shenzhen within 24 hours.

Get a Free Sizing Quote